The Buldog 9 is a robust machine designed for the highest demands on performance and operating load, most suitable for production lines. It cuts up to 1300 mm wide material from solid wood, veneers and varnished surfaces. The permanent table height allows the machine to achieve high quality cut surfaces and the degree of automation of the sanding processes sets this machine in the highest class.
Production lines using solid wood products and composite materials made of wood, paper and some plastics.
Key Features
- A very robust machine suitable for production lines
- The machine can be fitted with different aggregates
- The Buldog series 9 is designed for the highest demands on performance and operating load
Standard Equipment
- Rubbered Roller D = 240 mm, 90 Sh length of sanding belt 2 620 mm
- Frequency converter of feed belt speed 3-12 m / min
- Infrared sensor control of sanding belt oscillation
- Fixed table height with powered movement to sanding heads
- Programmable adjustment of sanding head roller and/ or pad
- NC control of the Touchscreen 10.4
- Electronic measuring and positioning of sanding heads with digital display workpiece height positioning
- Automatic feed belt and sanding belt tracking
- Electronic calibration of sanding heads depending on abrasive belt grit size
- Workpiece thickness sensor for automatic measuring and positioning of sanding heads
- Automatic setting of operating rollers into pre-programmed positions
- Two infeed and two outfeed pressure rollers
- Main motor pneumatic disk brake operating pressure switch 3,5 – 4,0 bar
- Air pressure control for belt tensioning of 2.5-5.5 bar
- Noise reduction features
- CE electric and safety standard
See the Buldog 9 in action
Optional Equipment
• Engine 25 HP (18.5 kW), 30 HP (22 kW), 40 HP (30 kW)
• Rubberized Roller Ø 240 mm 30 Sh, 45 Sh, 90 Sh
• Steel cylinder replacing the rubber Ø 240 mm
• Frequency converter of the main motor- belt speed 3-20m/s
• Two speed motor for lifting the Sanding units
• Sanding roller with bounce and thrust
• Limiting the maximum workpiece reduction
• Thrust bars for Sanding short pieces
• Automatic workpiece height positioner
• Pneumatic timing for cleaning the sanding belt
• Pneumatic time blow for cleaning the Sanding paper
• Pneumatic time blow with nozzle oscillation for cleaning Sanding belt
• Additional table – inlet
• Additional table – outlet
• Pneumatic base with bounce and thrust
• Two position pneumatic base with bounce and thrust
• Divided, pneumatically controlled base, bounce and thrust, width of segment 30 mm
• Divided, electric. driven foot, 30 mm segment width + NC Touchscreen 10.4 “
• Parts cleaning module with orbital blow
• Module for cleaning parts with rotating textile or nylon Brush diameter 140 mm 1,5 kw (2 HP)
• Vacuum table
• Air pump 4 kw
Machine Specifications
